Humminbird Level, Figure, Deadrise Angle, and not in line with trailer bunks or rollers. (Figure 11), Find a turbulence-freelocation at least 15” from the propeller(s)

Transom Transducer Installation

•If the transom is behind the propeller(s), it may be impossible to find an area clear from turbulence, and a different mounting technique or transducer type should be considered, such as an Inside the Hull Transducer.

•If you plan to trailer your boat, do not mount the transducer too close to trailer bunks or rollers to avoid moving or damaging the transducer during loading and unloading of the boat.

•If high speed operation is critical, you may want to consider using an In-Hull transducer instead of this Transom Mount transducer.

Level

15”

Deadrise Angle

Figure 12

Find a turbulence-free location at least 15” from the propeller(s)and not in line with trailer bunks or rollers. (Figure 11).

NOTE: The hydrodynamic shape of your transducer allows it to point straight down withoutdeadriseadjustment(Figure12).

NOTE:If you cannotfind a transommountlocationthat will work for your high-speed application,find an In-HullTransducerby contactingour CustomerResourceCenterat either1-800-633-1468or by visitingour websiteat www.humminbird.com.

10