Fish ID+TM (SetUp Menu)

(Setting Saved in Memory)

Make sure that the SetUp menu is selected, then press the POWER-MENU key until FISH ID+TM appears. Select either Off to view “raw” sonar returns or On to view Fish symbols. Fish ID+TM uses advanced signal processing to interpret sonar returns, and will display a Fish Symbol when very selective requirements are met. A select number of possible fish returns will be displayed with their associated depth. (On, Off, Default = On)

Scroll through all SetUp menu choices to exit the SetUp menu.

Tri Beam Dual Beam Single Beam

Raw Sonar,

 

 

200 kHz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fish ID+TM

 

 

Narrow beam,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Off

 

 

Fish ID+TM On

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Raw Sonar,

 

 

200 kHz

 

 

 

 

 

 

83 kHz

Fish ID+TM

 

 

Narrow beam,

 

 

 

 

 

 

 

 

Wide beam,

 

 

 

 

 

 

 

 

Off

 

 

Fish ID+TM On

 

 

 

 

 

 

Fish ID+TM On

 

 

 

 

 

 

 

Raw Sonar,

 

 

200 kHz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

455 kHz

Fish ID+TM

 

 

Narrow beam,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Leftand rightbeam,

Off

 

 

Fish ID+TM On

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fish ID+TM On

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE: Returns from the 200 kHz narrow beam are shown with shaded fish symbols while the 83 kHz wide beam (and 455 kHz beam) returns are displayed with hollow fish symbols.

NOTE: Hollow fish symbols are not available on 200 kHz Single Beam sonar units.

Bottom View (SetUp Menu)

(Setting Saved in Memory)

Make sure that the SetUp menu is selected, then press the POWER-MENU key until BOTTOM VIEW appears. Bottom View selects the method used to represent the bottom and structure on the display. (Structure ID, Black, WhiteLine, Inverse, Default = Inverse)

Scroll through all SetUp menu choices to exit the SetUp menu.

34