Humminbird 786CI manual Set Map Offset, Clear Map Offset

Set Map Offset

(Advanced)

Set Map Offset allows you to change the map offset used by your Chartplotter. The Se t Map Offset menu opt ion is a vailable when User Mode is set to Advanced (see Main Menu: User Mode).

NOTE: The Map Offset will be applied to all maps and not just the map that requires the correction. The Map Offset should be cleared if a differentmap is to be used.

To change the Map Offset setting:

1.Press the 4-WAY Cursor Control key to activate the cursor and move it to the location where the Map Offset will be applied.

NOTE: The cursor must be active in order for this procedure towork.

2.Make sure the User Mode is set to Advanced, then highlight Set Map Offset on the Chart main menu.

3.Press the RIGHT Cursor key to set the Map Offset. The Confirm dialog

box wil l a ppear. To conf irm the sett ing, press the RIGHT Cursor key once more. To cancel the setting, press the LEFT Cursor key.

NOTE: If the cursor was not active before you began this procedure, an error message will appear. Exit the menu, set the cursor, then try again.

Clear Map Offset

(Advanced)

Clear Map Offset allows you to clear th e Map Offset. The C lear Map Offset menu option is available when User Mode is set to Advanced (see Main Menu: User Mode) and a Map Offset is currently active.

To Clear Map Offset:

1.Make sure the User Mode is set to Advanced, then highlight Clear Map Offset on the Chart main menu.

2.Press the RIGHT Cursor key to clear the Map Offset.

100 Chart Menu Tab