HIDDEN FEATURES AND ADVANCED PROGRAMMING CAPABILITIES .......................

NOTE: The hidden features described below can only be entered by starting with the dial in the RUN position and holding down various buttons while the knob is turned to various setup positions. This makes it virtually impossible for someone to stumble onto these features.

1. Cycle and Soak

The Cycle and Soak feature allows the user to split each station’s run time into more usable, shorter duration waterings. This feature is particularly applicable for slopes and tight soil (such as clay) because Cycle and Soak will help prevent excessive run off. You should enter the Cycle time as a fraction of the station’s watering time and the Soak time as the minimum soak required before watering the next portion. The total number of cycles is determined by taking the total programmed station run time and dividing it by the Cycle time.

For example: Suppose Station 1 required 20 minutes worth of water but after only 5 minutes, runoff occurred. However, after 10 minutes all the water was absorbed. The solution would be to program 20 minutes for the Station Run Time, 5 minutes for the Cycle time, and 10 minutes for the Soak. Station 1 will then water for 5 minutes and then the rest of the stations in the program will water. After all the other stations have watered the controller will check to see if Station 1 had soaked for at least 10 minutes. If it had, then Station 1 will water for another 5 minutes. This process would continue to repeat itself until Station 1 watered 4 times for 5 minutes each time, a total of

20 minutes.

1.Start with the dial in the RUN position.

2.Press and hold the button down while turning the dial to the SET STATION RUN TIMES position.

3.Release the button. At this point, the display will show the station number, the cycle time will be blinking. The CYCLE icons will also be lit.

4.Press the or buttons to increase or decrease the cycle time from 1 to 60 minutes in 1 minute increments.

5.Press the key to advance to the next station and its cycle time.

6.Pressing the key will display the previous station and its cycle time.

7.Return the Dial to the RUN position after setting all the cycle and soak times.

RUN

CYCLE

SET STATION RUN TIMES

SOAK

29

Page 33
Image 33
Hunter Fan ICC-801PL, ICC-800PL owner manual Hidden Features and Advanced Programming Capabilities, Cycle and Soak

ICC-801PL, ICC-800PL specifications

The Hunter Fan ICC-800PL and ICC-801PL ceiling fans epitomize the blend of style, functionality, and cutting-edge technology. These models are designed for those who seek a modern aesthetic while prioritizing optimal air circulation and energy efficiency.

One of the standout features of the ICC-800PL and ICC-801PL fans is their sleek design. Both models are available in various finish options, allowing homeowners to match the fan seamlessly with their decor. The minimalist look combined with smooth lines gives these fans a contemporary appeal that complements both residential and commercial spaces.

In terms of performance, these ceiling fans are equipped with powerful motor technology that ensures maximum airflow while maintaining a whisper-quiet operation. This is particularly beneficial for bedrooms and living areas where noise can be a distraction. The fans feature multiple speed settings, allowing users to customize airflow to their comfort level.

Energy efficiency is another hallmark of the ICC-800PL and ICC-801PL models. They are designed to comply with energy conservation standards, which not only helps in reducing electricity bills but also makes them an environmentally friendly option. With their energy-efficient motors and blades designed for optimal performance, these fans provide effective cooling without excessive energy consumption.

An innovative technology featured in these models is the integrated remote control system. This allows users to operate the fan conveniently from anywhere in the room. The remote control can adjust speed settings, operate the light kit (when applicable), and even set a timer for automatic shut-off. This enhances user convenience, especially in larger spaces.

Furthermore, both models are compatible with smart home systems, meaning they can be integrated into existing smart home setups for added control through apps or voice commands. This feature makes it easier to maintain the ideal climate while enhancing the smart capabilities of any home or office.

The ICC-800PL and ICC-801PL also come with versatile installation options, including flush mount and downrod installation, catering to various ceiling heights. This flexibility ensures that anyone can enjoy the benefits of these ceiling fans regardless of their specific space constraints.

In conclusion, the Hunter Fan ICC-800PL and ICC-801PL ceiling fans are exceptional choices for consumers looking for quality, efficiency, and modern design. With their beautiful aesthetics, advanced technology, and silent operation, these ceiling fans are sure to enhance any interior environment while providing comfort and peace of mind.