SETTING WATERING START TIME
1. | Turn the dial to the SET | ||||
| WATERING START TIMES | ||||
| position. |
|
|
| |
2. | The factory preset is set on | ||||
| program A. If necessary you | ||||
| can select program B, C, or D | ||||
| by pressing the |
| button. | ||
3. | Use the |
| and |
| buttons to |
|
| ||||
|
| ||||
| change the start time. | ||||
| (Advances in | ||||
| increments.) |
|
| ||
4. | Press the | button to select | |||
SET WATERING START TIMES
PM
START TIME
ELIMINATING A PROGRAM START TIME
With the dial set to the SET
WATERING START TIMES
position, push the 
and 
buttons until you reach 12:00 AM (Midnight). From this position
push the 
button once to reach the OFF position.
SET WATERING START TIMES
PM
START TIME
the next start time, or | for |
the next program. |
|
NOTE: If a program has all eight start times turned off, then that program is off (all other program details are retained). Because there are no start times, there will be no watering with that program. This is a convenient way to stop watering
NOTE: Regardless of the order in which the start times are entered, the ICC will always arrange the start times in chronological order when the dial is moved off the SET WATERING START TIMES position.
One start time will activate all stations sequentially in that program. This eliminates the need to enter a start time for each station. Multiple start times in a program can be used for separate morning, afternoon, or evening watering cycles.
on one program only without turning the dial to the off position.
23
