Fuel Handling

Fuel

Note! The machine is equipped with a two-stroke engine and must always be run using a mixture of gasoline and two-stroke oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

	!	WARNING! Always ensure there is
	!	adequate ventilation when handling fuel.
		adequate ventilation when handling fuel.

Gasoline

•Use good quality unleaded gasoline.

•CAUTION! Engines equipped with catalytic converters must be run on unleaded fuel mixtures. Leaded gasoline will destroy the catalytic converter and it will no longer serve its purpose. The green fuel cap on saws ﬁtted with catalytic converters means that only unleaded gasoline can be used.

•The lowest recommended octane grade is 87 ((RON+MON)/2). If you run the engine on a lower octane grade than 87 so-called knocking can occur. This gives rise to a high engine temperature and increased bearing load, which can result in serious engine damage.

•When working with continuous high revs (e.g. limbing) a higher octane is recommended.

Environment fuel

HUSQVARNA recommends the use of alkylate fuel or environmental fuel for four-stroke engines blended with two-stroke oil as set out below. Note that carburetor adjustment may be necessary when changing the type of fuel (see instructions under the heading Carburetor).

Running-in

Avoid running at a too high speed for extended periods during the ﬁrst 10 hours.

Two-stroke oil

•For best results and performance use HUSQVARNA two-stroke engine oil, which is specially formulated for our air-cooled two stroke-engines.

•Never use two-stroke oil intended for water-cooled engines, sometimes referred to as outboard oil (rated TCW).

•Never use oil intended for four-stroke engines.

Mixing ratio

1:50 (2%) for all engines.

Gasoline, litre	Two-stroke oil, litre

	2% (1:50)

5	0,10

10	0,43/0,20

15	0,30

20	0,40

US gallon	US ﬂ. oz.

1	2 1/2

2 1/2	6 1/2

5	12 7/8

Mixing

•Always mix the gasoline and oil in a clean container intended for fuel.

•Always start by ﬁlling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of gasoline.

•Mix (shake) the fuel mixture thoroughly before ﬁlling the machine’s fuel tank.

•Do not mix more than one month’s supply of fuel at a time.

•If the machine is not used for some time the fuel tank should be emptied and cleaned.

Chain oil

•We recommend the use of special oil (chain oil) with good adhesion characteristics.

•Never use waste oil. This results in damage to the oil pump, the bar and the chain.

•It is important to use oil of the right grade (suitable viscosity range) to suit the air temperature.

20 – English

115 13 82-49 Rev.1 2009-08-21

115 13 82-49 specifications

The Husqvarna 115 13 82-49 is a powerful and versatile chainsaw designed for homeowners and light-duty professionals. Known for its user-friendly features and innovation, this model stands out for those seeking reliability and efficiency in outdoor tasks.

One of the main features of the Husqvarna 115 13 82-49 is its robust engine. Equipped with a 40.9cc, 2-stroke engine, it delivers a commendable power-to-weight ratio, making it ideal for a range of cutting applications, including trimming branches, felling small trees, and cutting firewood. The engine's design minimizes fuel consumption, ensuring longer operational time between refueling, thus improving overall efficiency.

The chainsaw incorporates advanced technologies that enhance user experience and safety. The Air Injection technology is a notable feature, which helps remove larger debris before it enters the air filter. This results in less frequent air filter cleaning and better engine performance, contributing to a longer lifespan of the chainsaw.

Another commendable technology is the LowVib system, designed to minimize vibration levels for the operator. This not only increases user comfort during extended periods of operation but also helps reduce fatigue, allowing users to work more effectively and safely. Additionally, the chainsaw features a chain brake that activates in the event of kickback, providing essential safety for operators.

The intuitive design of the Husqvarna 115 13 82-49 is evident in its lightweight construction, weighing approximately 10.36 pounds, which makes it easy to maneuver and reduces strain on the user's arms. The chainsaw also features an ergonomic handle, which provides a secure grip and enhances control during use.

Maintenance is made easy with its tool-less chain tensioning system, allowing users to adjust the chain quickly without the need for special tools. The transparent fuel tank design lets users easily monitor fuel levels, helping to prevent interruptions during work.

In summary, the Husqvarna 115 13 82-49 is an excellent choice for those in need of a reliable chainsaw. Its combination of power, efficiency, safety features, and ease of maintenance makes it suitable for both novice users and seasoned professionals looking for a dependable tool for their landscaping and yard work tasks. With Husqvarna's reputation for quality and innovation, the 115 13 82-49 continues to be a top choice among outdoor enthusiasts.

Husqvarna 115 13 82-49 manuel dutilisation Fuel Handling

Models: 115 13 82-49

FUEL HANDLING