MAINTENANCE

Starter

 

!

WARNING! When the recoil spring is

wound up in the starter housing it is

 

 

under tension and can, if handled

 

carelessly, pop out and cause personal

 

injury.

Care must be exercised when replacing the return spring or the starter cord. Wear protective glasses and protective gloves.

Changing a broken or worn starter cord

Loosen the screws that hold the starter against the crankcase and remove the starter.

• Pull out the cord approx. 30 cm (12 inches) and hook it into the notch in the rim of the pulley. Release the recoil spring by letting the pulley rotate slowly backwards.

1 2

Undo the screw in the centre of the pulley and remove the pulley. Insert and fasten a new starter cord to the pulley. Wind approx. 3 turns of the starter cord onto the pulley. Connect the pulley to the recoil spring so that the end of the spring engages in the pulley. Fit the screw in the center of the pulley. Insert the starter cord through the hole in the starter housing and the starter handle. Make a secure knot in the end of the starter cord.

Tensioning the recoil spring

Hook the starter cord in the notch in the pulley and turn the starter pulley about 2 turns clockwise.

Note! Check that the pulley can be turned an additional 1/2 turn when the starter cord is pulled all the way out.

1

2

Changing a broken recoil spring

Lift off the pulley. See instructions under heading Changing a broken or worn starter cord.

Remove the recoil spring from inside the pulley by tapping the pulley lightly with its inside face downwards against a work bench or the like. If the spring pops out during fitting, wind it up again, working from the outside in towards centre.

Lubricate the recoil spring with light oil. Fit the pulley and tension the recoil spring.

Fitting the starter

To fit the starter, first pull out the starter cord and place the starter in position against the crankcase. Then slowly release the starter cord so that the pulley engages with the pawls.

Fit and tighten the screws that hold the starter.

36 – English

115 13 82-49 Rev.1 2009-08-21

Page 36
Image 36
Husqvarna 115 13 82-49 Changing a broken or worn starter cord, Tensioning the recoil spring, Fitting the starter

115 13 82-49 specifications

The Husqvarna 115 13 82-49 is a powerful and versatile chainsaw designed for homeowners and light-duty professionals. Known for its user-friendly features and innovation, this model stands out for those seeking reliability and efficiency in outdoor tasks.

One of the main features of the Husqvarna 115 13 82-49 is its robust engine. Equipped with a 40.9cc, 2-stroke engine, it delivers a commendable power-to-weight ratio, making it ideal for a range of cutting applications, including trimming branches, felling small trees, and cutting firewood. The engine's design minimizes fuel consumption, ensuring longer operational time between refueling, thus improving overall efficiency.

The chainsaw incorporates advanced technologies that enhance user experience and safety. The Air Injection technology is a notable feature, which helps remove larger debris before it enters the air filter. This results in less frequent air filter cleaning and better engine performance, contributing to a longer lifespan of the chainsaw.

Another commendable technology is the LowVib system, designed to minimize vibration levels for the operator. This not only increases user comfort during extended periods of operation but also helps reduce fatigue, allowing users to work more effectively and safely. Additionally, the chainsaw features a chain brake that activates in the event of kickback, providing essential safety for operators.

The intuitive design of the Husqvarna 115 13 82-49 is evident in its lightweight construction, weighing approximately 10.36 pounds, which makes it easy to maneuver and reduces strain on the user's arms. The chainsaw also features an ergonomic handle, which provides a secure grip and enhances control during use.

Maintenance is made easy with its tool-less chain tensioning system, allowing users to adjust the chain quickly without the need for special tools. The transparent fuel tank design lets users easily monitor fuel levels, helping to prevent interruptions during work.

In summary, the Husqvarna 115 13 82-49 is an excellent choice for those in need of a reliable chainsaw. Its combination of power, efficiency, safety features, and ease of maintenance makes it suitable for both novice users and seasoned professionals looking for a dependable tool for their landscaping and yard work tasks. With Husqvarna's reputation for quality and innovation, the 115 13 82-49 continues to be a top choice among outdoor enthusiasts.