SAFETY WARNINGS FOR OPERATION OF THIS MACHINE
WARNINGS
DOs and DO NOTs
WARNING: FAILURE TO COMPLY WITH THESE WARNINGS AND OPERATING INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS BODILY INJURY.
DO read this entire operator’s manual before operating this machine. Understand all warnings, instructions,and controls.
DO keep all guards in place and in good condition.
DO wear
DO keep all parts of your body away from the grinding disks and all other moving parts. DO know how to stop the machine quickly in case of emergency.
DO shut off the engine and allow it to cool before refueling.
DO inspect the accessory disk, and tool adapters for damage before installing the tools. DO use only tools manufactured for use on surface grinders.
DO verify grinder drive configuration by checking engine / motor RPM, and spindle shaft RPM, pulley diameters.
DO read all safety materials and instructions that accompany any tool used with this machine. DO inspect each tool carefully before using it. If there are any signs of damage or unusual wear,
DO NOT USE THE TOOL!
DO mount the tool solidly and firmly.
DO make sure the tool and accessory disk are clean and free of dirt and debris before mounting the tool on the saw.
DO use the correct tool for the type of work being done. Check with tool manufacturer if you do not know if tool is correct.
DO operate this machine only in well ventilated areas.
DO instruct bystanders on where to stand while the machine is in operation. DO establish a training program for all operators of this machine.
DO clear the work area of unnecessary people. Never allow anyone to stand in near the machine while the engine is running.
DO always tie down the machine when transporting.
DO use caution and follow instructions when setting up or transporting the machine. DO have all service performed by competent service personnel
DO verify that the tool size is compatible with the machine before mounting the tool.
DO make sure the fuel caps of the machine and the fuel can are properly tightened before starting the engine. Move fuel can at least 10 feet from machine after fueling.
DO clean the machine after each day’s use.
DO remove adjusting tool and wrenches from machine before turning it on. DO keep the handles dry, clean and free of oil and dirt.
DO carefully maintain and clean for better and safer performance. Follow instructions for changing
accessories. Inspect tool cords periodically and, if damaged, have repaired by authorized service facility.
DO use caution when handling fuel.
DO always give a copy of this manual to the equipment user. If you need extra copies, call TOLL FREE
DO Determine the nature and volatility of any material that will come in contact with the grinding action of the tools used by this machine.
DO operate the machine only in areas where the material in contact with the grinding tools is known. DO use only
18
