IBM 8187, 8128, 8185, 8413, 8414, 8189, 8195
1 Rope clip
2 Integrated cable lock
3 Padlock loop

Identifying security locks

The following illustration shows the locations of the security features on the rear of the computer.

1 Rope clip

2 Integrated cable lock
3 Padlock loop

Rope clip

Using a 3/16-inch or 5-mm rope clip (sometimes referred to as a U-bolt), a steel security cable, and a padlock can secure your computer to a desk, table, or other non-permanent fixture. For computers designed to accommodate the rope clip, knockouts at the rear of the chassis are provided.

To install a rope clip:

1.Remove the cover. See “Removing the cover” on page 56.

2.Use a tool, such as a screwdriver, to remove the two metal knockouts.

3.Insert the rope clip through the rear panel; then attach and tighten the nuts with an appropriately sized or adjustable wrench.

4.Replace the computer cover. For more information, see “Replacing the cover and connecting the cables” on page 70.

66User Guide