IBM 9306, 9308 92

11. Loosen the four rail-adjustment screws on both rear slide-rail brackets; then,

extend the brackets to their maximum outward adjustment.

Note: Youmust remove the screw that attaches the cable-management arm to

the left-rear bracket in order to adjust the left slide rail.

Left-rear

adjustment

screws

Right-rear

adjustment

screws

Cable-management arm

12. Use the following illustration to guide you as you install either cage nuts or clip

nuts for the 1U location that you chose to install your flat panel monitor and

keyboard tray. Use the cage nuts or clip nuts from the miscellaneous hardware

kit.

Note: The miscellaneous hardware kit is shipped with the 1U Flat Panel

Monitor Console kit.

UUUU

UUU

Front Rear

13. Slide the tray all the way inward; then, with one person at the front of the rack

cabinet, and one person at the rear of the rack cabinet, carefully tilt the flat

panel monitor and keyboard tray at an angle and slide it into the rack cabinet.

Note: Ensure that the rear slide-rail brackets extend outside of the rear rack

cabinet mounting flanges, and the front slide-rail brackets are outside of

the front rack cabinet mounting flanges.

92 Hardware Maintenance Manual: IBM PC Server/Enterprise Racks Types 9306, 9308