NetBAY3E enclosure
Features
The IBM NetBAY3E enclosure provides a convenient 3-U high by 28-inch deep
storage cabinet for the installation of computer devices.
Note: Vertical measurements are given in rack units (U). One U is equal to 4.45
cm (1.75-inches).
Up to three NetBAY3E enclosures can be stacked under certain IBM servers.
Devices such as the IBM EXP10, an uninterruptable power supply (UPS), or various
telecommunications equipment can also be installed in a NetBAY3E enclosure.
Important:
vThe maximum server weight is 77 kg (170 lb.).
vRefer to the latest IBM Server Hardware Maintenance Manual when
servicing the server.
vAssure all power and signal cables are routed properly and are not
pinched.
vMake sure NetBAY3E enclosures in a stack are securely fastened
together.
vMake sure empty NetBAY3E enclosures (no devices installed) have
the rear cover securely attached.
vServers are lifted onto and off of the NetBAY3Eenclosure. Make
sure you have help when lifting.
Locations
The following sections contain information on specific equipment locations.

Casters

vTwo fixed casters 1at the front of the NetBAY3Eenclosure.
vTwo swivel casters2 at the rear of the NetBAY3Eenclosure.
© Copyright IBM Corp. 2001 79