1. See the switch documentation for detailed installation information.
2. Attach the rails to the front and rear of the rack, adjusting the length of the rails
to fit the depth of your rack cabinet if required.
3. Slide the switch onto the rails and attach the switch to the rack mounting
flanges, using the M6 screws and cage nuts that come with the switch.
4. See the switch documentation for information on how to connect cables.
Installing a fixed shelf
Youcan install a fixed shelf inside of your rack cabinet to hold some devices. A
fixed shelf can support a device that weighs up to 45 kg (100 lb), and occupies only
1/2U of space in your rack cabinet.
Note: The actual amount of space you use in your rack cabinet depends on the
height of the optional device that you put on the shelf, in addition to the
space taken by the shelf itself.
Use the following general procedure to install a fixed shelf in your rack cabinet:
Figure36. Installing an SP switch
Installing Optional Devices 117