power outlets.
Notes:
1. Power cables for devices that you will connect to the Rack PDU do not come
with the Rack PDU.
2. Youwill have some unused parts depending upon how you install the Rack
PDU.
3. When you install two Rack PDUs you will need some parts from both devices.
4. Youcan install other M/PDU family devices next to your Rack PDU using
mounting hardware from both devices.
Youcan install the Rack PDU vertically in the side of your rack cabinet, or
horizontally within 1U of EIA mounting space in your rack cabinet. The mounting
hardware that comes with this option enables you to install one Rack PDU next to
another in the same mounting space within your rack cabinet.
The following parts come with the Rack PDU:
vOne Rack PDU
vOne line cord (Some models include both a high voltage and a low voltage line
cord)
vOne vertical mounting plate
vOne vertical-mounting cable-management bracket
vOne horizontal mounting bracket
vOne single-device attachment bracket (for horizontal-mount installations)
vOne dual-device attachment bracket (for horizontal-mount installations)
vOne 1U blank filler panel (for horizontal-mount installations)
vMiscellaneous hardware kit (for attaching brackets and installing the device in a
rack cabinet)
vCable straps
vInstallation documentation
Note: The illustrations in this documentation might be slightly different from your
hardware.
Tool requirements
Youwill need the following tools to install the Rack PDU:
vA Phillips screwdriver
vA 10-mm nut driver or 10-mm open-end or box wrench
Installation overview
Use the following general steps to install your Rack PDU:
1. Install one or two devices in your rack cabinet
Installing Optional Devices 131