Note: Even though this hinge cover is not used with the Flat Panel Monitor
Rack Mount Kit, do not discard it. Store it with the other monitor stand
parts you remove for possible future use.
4. Gently push the stand cover 3 and slide it backwards until it is completely off
the stand.
5. Disconnect the signal cable and power cord from the flat panel monitor.
Carefully remove and save the plastic cable clamp to free the power cord.
Note: The plastic cable clamp is reusable and is needed to secure the power
cord after installing the Flat Panel Monitor Rack Mount Kit on the flat
panel monitor.
6. Lay the monitor facedown on a cushioned surface and remove the six screws
that secure the hinges to the flat panel monitor.
7. Lift off the hinge and monitor stand assembly.Store this assembly in a safe
place for possible future use.
Installing the new monitor stand
Refer to “Removing the existing flat panel monitor stand” on page175 for
instructions on how to remove the existing stand from the flat panel monitor. Before
installing the new stand, install the keyboard tray in the rack according to the
instructions that come with the rack or the keyboard tray option.
Figure79. Removing the plastic cable clamp
Figure80. Removing the existing monitor stand from the monitor
176 Hardware Maintenance Manual: IBM PC Server/Enterprise Racks Types 9306, 9308