Cabling instructions for horizontal-mount PDUs
If your Rack PDU came with more than one line cord, select either the high-voltage
cord or the low-voltage cord for your installation. Use the following procedure to
connect and route cables for Rack PDUs that you mounted in the horizontal EIA
space of your rack cabinet:
1. Connect the line cord that comes with this option to the inlet on a Rack PDU;
then, remove the screw on the cable clamp and route the line cord through the
clamp.
MAIN MAIN
Figure51. Connecting and routing other power cables to the outlets
140 Hardware Maintenance Manual: IBM PC Server/Enterprise Racks Types 9306, 9308