Removing and installing rack doors
Remove the rack doors when installing and removing options in the rack cabinet. All
rack cabinets come with front and rear doors installed.
Note: Youonly need to remove a door if part of the rack cabinet is obstructed by
the door as you install the optional device.
Removing and installing a NetBAY25 door: Use the following procedure to
remove a front or rear door from the rack cabinet:
1. Unlock and open the door.
2. Grasp the door firmly with both hands and lift it upward and away from the
hinges; then, set the door aside.
Reverse this procedure to install the door on the rack cabinet.
Figure12. Removing a front door from the NetBAY25 rack cabinet
Type9306 Model 250/420/421 17