Scan Pattern Setup
Port/Sec Name
6/20 Downtown
5/20 Sales-A
4/10 Sales-B
1/10 Match
F2 for defaults
If Name order was selected, the Port and Name columns will be reversed.
4. Using the keyboard keys, select the port number of the first server to be
included in the scan. Note that the server name, if any is assigned, appears in
the far right column on the menu.
5. Press the Tab key or Right Arrow (→)key to move the highlighting to the Sec
column. Then, use the keyboard keys to enter a time value, in seconds, for the
length of time you want this server to be connected to the monitor and
keyboard, before switching to the next server in the scan.
6. Press the Down Arrow (↓)key to move the highlighting to the next port in the
Port column and repeat step 5. Todelete unwanted ports from the scan list in
the Scan Pattern Setup window, place the highlighting on the top-most port to
be removed and press the Delete key (not the Del key on the numeric
keypad).
7. When you have finished setting the scan pattern, press the Enter key. Press
Esc at any time before pressing Enter to retain the previous scan pattern.
Note: Pressing the F2 key will return all Port and Sec values to the factory
defaults.
8. Toexit, press Esc.
Assigning Unique Names to Servers
Unique names can be given to servers and secondary selector switches. Toassign
names:
1. Press the Print Screen key
2. Press the F2 key to display the Advanced Menu screen. Press the RightArrow
(→)key to move the highlight to the Setup Menu.
3. Using the Up Arrow (↑)and Down Arrow (↓)keys, move the highlighting to
Names and press the Enter key.The Port Naming menu appears, as shown
below.
Port Naming
Port Name
1 MAGIC
2 CENTRALOFC
3 SALES-C
4 SALES-B
5 SALES-A
6 DOWNTOWN
7 FOREIGN
8
4. Move the highlighting to the Port entry for which the server name is to be
entered or changed. Type in the name of the server using up to 12
alphanumeric characters.
Installing Optional Devices 185