IBM 9306, 9308 Type 9306 Models 4QS, 4QX, 9QS, 9QX, 9TS, 9TX

Type 9306 Models 4QS, 4QX, 9QS, 9QX, 9TS, 9TX

Features

The 9306 IBM PC Server Rack Enclosure, models 4QS, 9QS, 9TS come in three

primary models.

v19-inch Quad Primary Server Rack, Model 9QS

v19-inch Tri Primary Server Rack, Model 9TS

v24-inch Quad Primary Server Rack, Model 4QS

A Quad Primary Server Rack can house up to four IBM PC Servers. TheTri

Primary Server Rack can house up to three IBM PC Servers.

Both Quad and Tri Primary Server Racks provide a built in server selector which

connects to one set of console devices (monitor, keyboard, and mouse.) The server

selector works independently from the server’s operating systems, enabling the

connected servers to run different operating systems.

These IBM 9306 PC Server Rack Enclosure models are shipped preassembled and

pre-cabled.

Three optional IBM PC Server Rack Expansion models are available to expand the

capacity of the IBM PC Server Rack Primary Enclosure. The optional IBM PC

Server Rack Expansion models are:

v19-inch Quad Expansion Rack, Model 9QX

v19-inch Tri Expansion Rack, Model 9TX

v24-inch Quad Expansion Rack, Model 4QX

The IBM PC Server Rack Expansion models allow the installation of up to four

more servers using the Primary IBM PC Server Rack monitor, keyboard, and

mouse.

Locations

The following sections contain information on specific equipment locations.

Note: For instructions on how to power-off the rack, see “Powering off the rack”on

page 3.

Toremove the Server Selector Console:

1. Power-off the rack.

2. Use an 1/8-inch allen wrench to remove screws.

3. Disconnect the server selector cable from the back of the server selector

console.

4. Remove the server selector console from the cabinet.