Solving computer problems
Problem: When you are using the port replicator, resuming normal operation from hibernation or standby mode takes a long time.
Solution: If the Ethernet port is enabled, but the port replicator is not connected to a LAN, resuming operation can take a long time. The computer queries the Ethernet until the timeout timer stops the query. If you want to access an Ethernet, connect the network cable. If you are not using the network, disable the Ethernet port as follows:
For Windows 98:
1.In the Control Panel,
2.Click the Device Manager tab.
3.
4.
5.Select the Disable in this hardware profile check box.
6.Click OK.
7.Close all windows.
8.Restart the computer.
For Windows NT®:
1.In the Control Panel,
2.Select Intel EtherExpress PRO Adapter, and click Startup...
3.Select Disabled.
4.Click OK.
5.Click Close.
6.Close all windows.
7.Restart the computer by powering it off and on again.
Chapter 2. Solving computer problems 21