Upgrading the hard disk drive
Upgrading the hard disk drive
You can increase the storage capacity of your computer by replacing the hard disk drive with one of greater capacity. You can purchase a new hard disk drive from your IBM reseller or IBM marketing representative.
Note: Replace the hard disk drive only if you upgrade it or have it repaired. The connectors and bay of the hard disk drive were not designed for frequent changes, or drive swapping.
Attention
Handling a hard disk drive
vDo not drop the drive or subject it to physical shocks. Put the drive on a material, such as soft cloth, that absorbs the physical shock.
vDo not apply pressure to the cover of the drive.
vDo not touch the connector.
The drive is very sensitive. Incorrect handling can cause damage and permanent loss of data on the hard disk. Before removing the hard disk drive, make a backup copy of all the information on the hard disk, and then turn the computer off. Never remove the drive while the system is operating, in standby mode, or in hibernation mode.
To upgrade the hard disk drive, do the following:
1.Turn off the computer; then disconnect the ac adapter and all cables from the computer.
2.Close the computer display, and turn the computer over.
3.Remove the battery.
4.Remove the screw that secures the hard disk drive. You can use a coin in the slot of the screw.
32ThinkPad® A22 Service and Troubleshooting Guide
