Solving computer problems
For Windows 2000:
Note: To use Fn+F12 for hibernation in Windows 2000, you must have the IBM PM device driver installed on your computer.
1.Start the ThinkPad Configuration Program.
2.Click Power Management.
3.Click the Hibernate tab.
4.Select the Enable hibernate support checkbox.
5.Click OK.
Computer screen problems
Problem: The screen is blank.
Solution: Press the Fn+Home keys to make the screen brighter. If the problem persists, perform the “Solution” in the problem below.
Problem: The screen is unreadable or distorted.
Solution: Make sure that:
vThe display device driver is installed correctly.
vThe display resolution and color depth are correctly set.
vThe monitor type is correct.
To check these settings, do as follows:
For Windows 98 or Windows 2000:
1.Click Start → Settings → Control Panel.
2.
3.Click the Settings tab.
4.Check whether the color depth and resolution are correctly set.
5.Click Advanced...
6.Click the Adapter tab.
7.Make sure “RAGE
8.Click the Monitor tab. (For Windows 2000, it is shown as “ATI RAGE
9.Make sure the information is correct.
For Windows NT:
1.Click Start → Settings → Control Panel.
2.
3.Click the Settings tab.
Chapter 2. Solving computer problems 21