IBM A22e manual Solving computer problems

Solving computer problems

To use a Recovery CD to restore your pre-installed software, do the following:

Note: Before starting the recovery, refer to the manual shipped with the Recovery CD.

1.If your computer has a CD-ROM or DVD-ROM drive, connect it.

2.Insert the Recovery CD into the CD-ROM or DVD-ROM drive.

3.Save all your files, and turn off your computer.

4.Change the boot sequence as follows:

a.Turn on your computer; then while the Press F1 for IBM BIOS Setup Utility message is displayed at the lower left of the screen, press the F1 key to start the BIOS Setup Utility.

b.With the cursor key, select Startup; then press Enter.

c.Select Boot by pressing Enter.

d.With the cursor key, select ATAPI CD-ROM Drive .

e.Press F6 repeatedly until the ATAPI CD-ROM Drive item has moved to the top of the device listing.

f.Press F10 and Enter to save this setting and exit this utility.

5.The Product Recovery program menu opens. From the list displayed on the screen, select the operating system you want to recover.

6.Select the recovery options you want, and follow the instructions on the screen.

7.Restart the system by pressing Ctrl+Alt+Del or by turning the computer off and then on again. Your computer restarts with the pre-installed operating system, drivers, and software.

Note: Network drivers are not automatically restored with Windows NT; you will need to reinstall them.

Chapter 2. Solving computer problems 27