IBM ARTIC960RxD manual SC-Bus Converter Connector, H.100, 4-Drop Cable With

H.100, 4-Drop Cable With					SC-Bus Converter Connector:	This Multi-drop
cable assembly				is	used to connect the internal	busses	on	up	to	four	IBM
ARTIC960RxD Quad				DTAs	with H.100 connectors. It has an additional connector to
connect to cable RX. See “SC-Bus,5-Drop Cable” on page 1-6.								This	allows
adapters with SC-Bus					connectors to be used with the IBM ARTIC960RxD PCI
Adapters		and	other		adapters that have H.100 connectors.
The	following		figure		illustrates the internal cabling for		up	to	four IBM		ARTIC960RxD
Quad DTAs with an additional connector to the SC-Bus 5-drop								cable with SC-Bus
converter		connector. Refer to Table 1-1on page				1-3 to	position			the jumper on
JP01	on	the	base		card.

	SC-Bus
RY	Converter
	Connector

H.100, 4-Drop cable with SC-Bus Converter Connector

Table	1-4. H.100,		4-Drop Cable		with SC-Bus Converter	Connector	Cable Information
Cable		Cable	Name/	Description	Part	Feature		Length
Letter					Number	Code
								m	ft
RY		H.100, 4-Drop Cable with SC-Bus08L1219				2879		0.176	0.58
		Converter		Connector

Note: This cable is referred to as the Four-drop, H.100 Cable with SC-Bus Converter in other publications associated with this cable.

Chapter 1. Installation1-7