IBM ARTIC960RxD New Zealand Telecommunications Statement, must, A-6 Installation and Users Guide

Australian Telecommunications				Statement
ATTENTION		:
This	card	must	be	connected to TNV	Telecommunications	equipment	or	networks
using	the	E1 120		Ohm Balanced DB-15	Isolated cable	only. On	the	75	ohm
connection,		the	E1	120 Ohm Balanced	DB-15 Isolated	cable and	an	ACA	approved
balun	must	be	used.

New Zealand Telecommunications Statement

ATTENTION : New Zealand Users

The NZ Telecom Telepermit				No. PTC 414/98/008 has been issued for direct
connection	to	the	Telecom	network via its E1 120-ohm balanced interface only. The
75-ohm interface may be				used for connection to other equipment (e.g. PBX) but not
directly	to	the	Telecom	network.

Norway and Sweden Telecommunications Statement

ATTENTION :

This card must only be connected to the Telecommunications Network using the E1 120-ohm Balanced DB-15 Isolated cable.

A-6Installation and User's Guide