IBM ARTIC960RxD manual Installing, Quad Digital Trunk PCI Adapter

Installing the		IBM	ARTIC960RxD	Quad Digital Trunk PCI Adapter
The	following	procedure		describes how to	install the	IBM ARTIC960RxD	Quad DTA
into	the system unit. The steps may vary				depending on	your system	unit. Refer to
the	documentation that			came with your system unit for detailed instructions on
performing the			following	procedures:

Note: Insure that the jumpers are set as described in “Jumper Installation Information” on page 1-3

ŸBe sure to perform necessary shutdown procedures to protect your system and data.

Ÿ	Shut down your system unit
Ÿ	Remove the system unit covers
Ÿ	Install	the	IBM ARTIC960RxD	Quad DTA into your system unit
Ÿ	Install	the	H.100 cable if necessary
Ÿ	Replace	the	system unit	covers

1-4Installation and User's Guide