CE | Utility | Program | Diskette |
|
|
|
|
|
|
|
| ||||
Writing | the | VPD | Data |
|
|
|
|
|
|
|
|
|
| ||
The EEPROM on the system |
| board | contains | the |
| Vital |
| ||||||||
Product Data (VPD) — that is, | a | computer | serial | number | |||||||||||
and a system board serial number. When | you | replace the | |||||||||||||
system | board, | restore | the | computer | serial | number | using | ||||||||
the | VPD | Data | Utility in | the | ThinkPad CE | Utility | Diskette. | ||||||||
The | serial | number | label | is | attached | to | the | computer. | |||||||
Flash UUID |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The EEPROM on the system |
| board | contains | the |
| Universal | |||||||||
Unique | ID | (UUID) — | that is, for Microsoft or | Internet use. | |||||||||||
When you replace the system board using the Flash UUID | |||||||||||||||
Utility | in | the ThinkPad | CE | Utility | Diskette. |
| The | UUID utility | |||||||
will | automatically | assign | the | UUID |
| via | Windows. |
| |||||||
Running the Diagnostics
Use either the TrackPoint or the cursor move keys to interact with the tests.
1.Connect the external floppy disk drive to the com- puter.
2.Insert the PC Doctor startup disk into the diskette drive.
3.
4. From | the | PC DOS | 7.0 Startup Menu, 1select. |
ThinkPad | 240 | and | press Enter. |
The
5. At the main menu, select the test to run.
6. PressEnter to run the test selected.
7. After starting a test, do not press any key until prompted, then follow the instructions on the screen.
8.When the test is completed,Esc topressreturn to the main menu.
9.SelectQuit/Exit Diags to exit the diagnostics utility.
ThinkPad 24023
