Ice-O-Matic ICEU070A installation manual Remove Thumb Screw Holding Curtain Remove Curtain

Models: ICEU070A

1 21
Download 21 pages 48.76 Kb
Page 18
Image 18
Remove Thumb Screw Holding Curtain

23.Rotate the control knob to the Normal position.

24.Operate the machine with the cleaning toggle switch in the Operation position for 4 minutes.

25.Switch the cleaning toggle switch to the Cleaning position and operate the machine for 1 minute.

26.Repeat steps 23 and 24 five times. After the fifth time rotate the control knob counter clockwise to the Off position.

27.Remove evaporator cover. Pour sanitizer

solution over the entire surface of the evaporator section and wash or spray the evaporator cover bottom with sanitizer. Return evaporator cover to its original position.

28.Remove curtain, remove clamp and drain cap from the bottom of the reservoir, allow all the water to drain out. Return the drain cap and clamp to their original positions.

ICEU070A

29.Thoroughly spray or wipe the interior of the ice storage bin, bottom of the evaporator cover and the spray platform with the sanitizing solution.

30.Completely immerse the curtain in the sanitizing solution.

31.Return the evaporator cover and curtain to their original positions.

32.Reconnect water supply.

33.Rotate control knob to its original position. Switch the cleaning toggle switch to the Cleaning position for two minutes and then switch it to the Operation position. Operate the machine until one batch of ice has been released into the bin. Pour warm water over the ice to melt it.

34.Return the front panel to its original position and secure with the original screws.

Remove Thumb Screw Holding Curtain

Remove Curtain

Page 16

Page 18
Image 18
Ice-O-Matic ICEU070A installation manual Remove Thumb Screw Holding Curtain Remove Curtain