ICEU070A
General Information And Installation
This model is supplied from the factory completely
Make sure that the ice machine is connected to its own circuit and individually fused (see data plate for maximum fuse size). This is a
Low voltage can cause improper operation and may be responsible for serious damage to the overload switch and motor windings that is not covered by warranty.
NOTE. All external wiring should conform to national, state and local standards and regulations.
Check voltage on the line and the ice maker’s data plate before connecting the unit. Extension cords must not be used.
Location: If the unit is built into a cabinet with no side ventilation, the ice production will be reduced by 20% of rated capacity, restricted space of an inch or so on each side will cause a 10% reduction. Six inches of space to the left and right will allow the unit to operate satisfactorily.
The daily
To keep your
Warranty
The warranty statement for this product is on page 18 of this manual. Refer to it for applicable coverage. In general warranty covers defects in material or workmanship. It does not cover maintenance, corrections to installations, or situations when the machine is operated in circumstances that exceed the limitations printed in this manual.
Page 3