Icom IC-A5 Memory Operation, Memory channel selection, Transferring memory contents

4 MEMORY OPERATION

■Memory channel selection

The transceiver has 200 memory channels for storage of often-used frequencies along with 6-character notes.

qPush [MR] to select memory mode.

•Memory BANK number and memory CH number appears.

Using the [DIAL]:

w Push [BANK], then rotate the [DIAL] to select the desired memory bank number, then push [BANK] (or [CLR]) to exit the bank selection mode.

•“BANK” appears.

eRotate [DIAL] to select the desired memory CH number.

•If no memory channel is programmed in the selected bank, no memory CH selection is available.

Using the Keypad:

wPush [BANK], then push appropriate digit key (0 to 9) to select the desired memory bank number, then push [BANK] (or [CLR]) to exit the bank-selection mode.

• “BANK” appears.

ePush 2 appropriate digit key (00 to 19) to select the de- sired memory CH number.

•If no memory channel is programmed in the selected bank, no memory CH selection is available.

Comments appear first when programmed, however, the transceiver can be programmed by your dealer to show the operating frequency first. Push [MR] to display the comment in this case.

■Transferring memory contents

This function transfers a memory channel’s contents into the frequency mode. This is useful when searching for signals around a memory channel’s frequency.

qPush [MR] to select memory mode.

wSelect the desired memory channel to be transferred using the [DIAL] or keypad.

ePush , then push [MR].

•BANK number and memory CH number disappears as frequency mode is automatically selected and the mem- ory contents are transferred.

then

Memory mode Frequency mode

12