10 SPECIFICATIONS
DGeneral
• Frequency coverage (MHz): TX | 118.000 to 136.975 |
RX | 108.000 to 136.975*1 |
WX | 161.650 to 163.275*2 |
*1:
*2: U.S.A. version only.
• Mode | : 6K00A3E | |
|
| 16K0G3E (161.65. to 163.275 MHz) |
• Number of memory channels : | 200 (10 BANK x 20 CH) | |
• Acceptable power supply | : | 9.6 V DC nominal |
(negative ground) |
| (authorized battery packs) |
• Usable temp. range | : | |
• Frequency stability | : ±17 ppm | |
• Current drain | : |
|
Tx |
| 1.8 A (CW) max. |
|
| 1.1 A (CW) typical |
Rx |
| 70 mA typical (at stand by) |
|
| 500 mA max. (at AF max.) |
• Antenna impedance | : 50 Ω (nominal) | |
• Dimensions | : 58(W)✕107(H)✕28.5(D) mm | |
(projections not incl.) |
|
|
• Weight (with | : 340 g | |
All stated specifications are subject to change without notice or obligation.
DTransmitter
• Output power | : 5 W (PEP) | typical |
| 1.5 W (CW) | typical |
• Modulation | : Low level modulation | |
• Modulation limiting | : 70 to 100 % |
|
•Audio harmonic distortion : Less than 10 % (at 60 % modulation)
• Hum and noise ratio | : More than 35 dB |
• Spurious emissions | : More than 60 dB |
• Microphone impedance | : 150 Ω |
DReceiver
• Receive system | : Double conversion | |
| superheterodyne | |
• Intermediate frequencies | : 1st | 30.05 MHz |
| 2nd | 450 kHz |
• Sensitivity (AM 6dB S/N) | : Less than 0dBµ | |
(FM 12dB SINAD): Less than 0dBµ | ||
• Squelch sensitivity (AM) | : Less than | |
(FM ) | : Less than | |
• Selectivity | : 7.5 kHz (at 6 dB) or more | |
| 25 kHz (at 60 dB) or less | |
• Spurious response | : More than 60 dB | |
• Audio output power | : 500 mW (at 10% distortion | |
(at 9.6 V DC) | with an 8 Ω load) | |
• Noise and hum | : More than 25 dB | |
• External SP connector | : | |
30
