Icom IC-A5 instruction manual Weather channel scan, TAG channels

■Weather channel scan

(U.S.A. version only)

qPush , then push [ENT (WX)] to select a weather channel.

wSet squelch to the point where noise is just muted.

e Push , then push [SQL (SCAN)] to start the scan.

•When a signal is received, the scan pauses until it disap- pears.

•To change the scanning direction, rotate the [DIAL].

rTo stop the scan, push [CLR].

SCAN OPERATION 5

■“TAG” channels

Memory and weather* channels can be specified to be skipped for the memory and weather* channel scans respec- tively. The “TAG” channel function is only available during scan operation.

Shows the		then
“TAG” channel.
Memory channel	19 is	Memory	channel 19	is
scanned during memory		skipped during scan.
scan.

qPush [MR] to select memory mode; or, push , then push [ENT (WX)] to select a weather channel*.

wSelect the desired channel to be a “TAG” channel.

e Push , then push [9 (TAG)].

•“TAG” appears.

•Non-“TAG” channels are skipped during scan. r To cancel the “TAG” setting, repeat above steps.

*Weather channel: U.S.A. version only.

17