Toshiba DK8 Test Mode Function Diagram, LCD Message Mode, Remote Called Station Message Mode

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES

SECTION 100-816-600

MARCH 1993

			PUBLIC TELEPHONE
REMOTE SITE			NETWORK	STRATA DK16/DK8
PC OR
TERMINAL
RS-232	MODEM	CO LINE	CO LINE A	CO LINE A
(DK16: 300 or 1200 BPS)				IMDU OR EXT. MODEM
	(DK8: 1200 BPS)			DATA
				BUS
				CPU	TOSHIBA
				STATION
				CKT
REMOTE		CO LINE	CO LINE B	CO LINE B
STATION B
					Digital Telephone XX
REMOTE		CO LINE	CO LINE C		CO-to-CO
STATION C				CO LINE C	CONNECTION
			TIME OR
			WEATHER

FIGURE 8

TEST MODE FUNCTION DIAGRAM

2)Establish a talk path between a remote station and the time or weather service via a CO-to- CO connection through STRATA DK8 or DK16.

10.13The procedures in the tables provide ex- amples of the types of tests and functions that can be accomplished with the Test Mode. These proce- dures do not cover all the possible tests that can be performed remotely; however, by using the prin- ciples given, other tests are possible.

11LCD MESSAGE MODE

11.00General

11.01This mode allows a local or remote terminal to set Called and Calling Station LCD messages for station users (see Table RM-BO ~ BR). The mes- sages may be system or station type and are stored in their respective memory locations when set.

11.10Remote Called Station Message Mode

11.11Allows the terminal to set a Called Station Message for an originating station with the destina- tion of the message being a station or group of

stations.

11.12When the message is set, the Msg LED(s) on the destination station(s) flash.

11.13When a destination station calls the originat- ing station, the message is displayed on the desti- nation station’s LCD.

Mode 94: To edit and/or review a Called Station Message before setting it, use this mode. It will print out the existing message and allow addi- tions to it (such as a time or a date) before it is set. (The message cannot be changed with this mode—just added to.)

Mode 96: To add or change a Called Station Message before setting it, use this mode. It does not display the existing message, but allows a completely new message to be entered before it is set.

11.20Remote Calling Station Message Mode

11.21Allows the terminal to set a Calling Station Message for a station. The message will be set on

-13-