Toshiba DK8, DK 16 manual Table RM-BJ Program LCR Modified DIGITS-END

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES

SECTION 100-816-600

MARCH 1993

TABLE RM-BJ

PROGRAM 55-2

LCR MODIFIED DIGITS-END

STEP			ACTION	DISPLAY/PRINTOUT
1	Enter Program Mode			>MODE PROG
	At the >MODE prompt, enter P R O G CR.			P
2	Enter Program Number 55			P 55
	Press CR.			P55
3	Enter Modified Digits Table Number			P55 1
	Refer to the System Record Sheet and enter the required
	modified digits table number (1 ~ 6).
	Example: Enter table number 1, enter 1.
4	Enter Code 2			P55 12	(up to 22 digits)
	The system will display any previously entered digits (up to 22).				1 2 3 4 P3
	Refer to the System Record Sheet and enter new numbers,
	if required.
	Example: Enter 1 2 3 4 P 3.
	NOTE: Pause codes may also be entered. To enter pauses,
		press "P" plus the pause number (1 ~ 8).
	Special Code Input
	Pause =		P 1 ~ P 8.
	Tone	=	T at beginning of digits to convert.
	Clear	=	C as first digit, then CR.
5	To Exit Program/Store Data			P55 12	(up to 22 digits)
	A) To store data, press CR.				1 2 3 4 P3
	B) Continue returning to step 3 until all data has been entered			P55 ##
	for this program.			P
	C) To exit this program, press # # CR.

-59-