Toshiba DK 16 manual DK8 Worksheet 3, Peripherals and Upgrades, Base Unit Peripherals

INSTALLATION-CONFIGURATION

SECTION 100-816-203

MARCH 1993

DK8 WORKSHEET 3, PERIPHERALS AND UPGRADES

1. BASE UNIT PERIPHERALS

Battery Backup Interface: Yes or No _____

One or two HPFB batteries can be connected to a backup battery interface (Standard on DK8) to provide backup battery backup if there is a power failure. (Connecting cable is included. 1-HPFB for .5 ~ 1 hour backup; 2-HPFBs for 1.5 ~ 2 hours backup.)

QRCU: Yes or No _____

The QRCU is required to interpret Dual-tone Multi-frequency (DTMF) tones from standard telephones, Voice Mail, Auto Attendant, and DISA CO circuits, or if the Auto Busy Redial (ABR) feature is required.

Music-on-hold/Background Music Source Interface: Yes or No _____

A music source can be connected to this interface (Standard on DK8) to provide Music-on-hold to CO lines and stations on hold, and to provide Background Music to station speakers and external page speakers.

Power Failure Transfer Interface: Yes or No _____

A standard telephone can be connected to this interface to provide connection to a CO line if there is a power failure. PFT interface is standard on DK8; one customer-supplied standard telephone is required.

600 ohm page Interface (Standard on DK8): Yes or No _____

This interface connects with customer-supplied speakers and amplifiers for paging (or Toshiba HESB) and Background Music applications.

QSMU: Yes or No _____

A customer-supplied Station Message Detail Recording (SMDR) printer, or Remote Maintenance Terminal (TTY) or modem.

PPTC: Yes or No _____

Modular adaptor required for interface to SMDR device or Maintenance Terminal or Modem.

2.TELEPHONE UPGRADES (All upgrades share the telephone port and do not require separate ports.)

Add-on Module (ADM): Total _____

2000-series digital telephones can be equipped with an Add-on Module to provide 10 Direct Station Selection buttons, autodial buttons, all call page, and night transfer (if PDIU-DI2 is installed, ADM cannot be installed).

DVSU: Total _____

One DVSU is required for each digital telephone that must receive Off-hook Call Announce.

HESC-65A: Total _____

One HESC-65A modular connecting cable is required to connect the HESB to the HHEU in each telephone requiring the Loud Ringing Bell feature. See HHEU and HESB.

HHEU: Total _____

One HHEU must be installed in each digital telephone that supports a headset or connects to an HESB for the Loud Ringing Bell feature. See HESC-65A.

PDIU-DI2:Total_____ for 2000-series Digital Telephones;

(If ADM is installed, PDIU-DI2 cannot be installed). PDIU-D1:Total_____ for 1000-series Digital Telephones

Digital telephones must be equipped with a PDIU-DI2 or a PDIU-DI to transmit and receive voice and data calls.

3-13