Toshiba DK 16, DK8 manual Table RM-AR, Toll Restriction Override Code, Table RM-AS

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES

SECTION 100-816-600

MARCH 1993

TABLE RM-AR

PROGRAM 45-8 ~ 9

TOLL RESTRICTION OVERRIDE CODE

STEP	ACTION			DISPLAY/PRINTOUT
1	Enter the Program Mode	>MODE PROG
	At the >MODE prompt, enter P R O G CR.	P
2	Enter the Program Number 45	P 45
	Press CR.	P45
3	Refer to the System Record Sheet and enter 8 or 9 for the	P45	8	NNNN
	desired code number. The system will display the present
	override code number.
4	Refer to the record sheet and enter a new number if required.	P45	8	NNNN 1234
	Example: 1234. Enter: 1 2 3 4.
5	To Exit Program/Store Data	P45	8	NNNN 1234
	A) To store data, press CR.	P45	##
	B) To exit this program, press # # CR.	P

TABLE RM-AS

PROGRAM 46–2 ~ 4

TOLL RESTRICTION ALLOWED/DENIED AREA CODES ASSIGNED BY CLASS

STEP		ACTION						DISPLAY/PRINTOUT
1	Enter Program Mode					>MODE PROG
	At the >MODE prompt, enter P R O G CR.					P
2	Enter Program Number 46					P 46
	Press CR.					P46
3	Enter class number (1 ~ 4).					P46
									Class Number
4	Enter 2, 3, or 4 SPACE					P46
	• 2 — to add codes to memory (allow).									2, 3 or 4
	• 3 — to delete codes from memory (deny).					ALLOW? or DENY?
	• 4 SPACE — to display codes in memory (allowed codes).
5	Refer to the System Record Sheet and enter the area code or					P46	X Y
	area code group. Single		. Group	*	.	ALLOW				–
	Press SPACE to enter more codes.					or DENY
6	Press SPACE to temporarily store data. Press CR when					P46
	completed.
7	Continue returning to step 3 until all data input is completed for
	this program.
8	To Exit this Program					P46	##
	Press # # CR.					P

-46-