Toshiba DK 16 Table RM-S Program System Assignments Basic Timing, Example Port 00, enter 0 0 CR

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES

SECTION 100-816-600

MARCH 1993

TABLE RM-S

PROGRAM 12

SYSTEM ASSIGNMENTS – BASIC TIMING

STEP		ACTION		DISPLAY/PRINTOUT
1	Enter the Program Mode		>MODE PROG
	At the >MODE prompt, enter P R O G CR.		P
2	Enter Program Number 12		P 12
	Press CR.		P12
3	Check the record sheet and enter the program code that is		P12	3 1
	required.
	As an example, feature 3, enter 3.
	The present selection will be displayed.
4	Refer to the record sheet and change if required.		P12	3 1 2
	As an example, change it to 2.
	Enter 2.
5	To Exit Program/Store Data		P12	3 1 2
	A)	To store data, press CR.	P12	##
	B)	Continue returning to Step 3 until all Program 12 data is	P
		entered.
	C) To exit this program, press # # CR.

TABLE RM-T

PROGRAM 13

DEFINING THE MESSAGE CENTER

STEP	ACTION			DISPLAY/PRINTOUT
1	Enter the Program Mode	>MODE PROG
	At the >MODE prompt, enter P R O G CR.	P
2	Enter Program Number 13	P 13
	Press CR.	P13
3	Enter the number 1. The present port number will be displayed.	P13
		P13	1	NN
4	Refer to the record sheet and enter the required port number.	P13	1	NN 00
	Example: Port 00, enter 0 0 CR.	P13
5	To Exit this Program	P13	1	NN 00
	Press # # CR.	P13	##
		P

NOTES:

1.A blank is displayed by "N".

2.Programs 15 and 16 use Type 1 procedure.

-28-