Toshiba DK8, DK 16 manual Table RM-AC Program Fixed Call Forward

	REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
			SECTION 100-816-600
			MARCH 1993
	TABLE RM-AB
	PROGRAM 34
	HOLD RECALL TIMING
STEP	ACTION		DISPLAY/PRINTOUT
1	Enter the Program Mode	>MODE PROG
	At the >MODE prompt, enter P R O G CR.	P
2	Enter Program Number 34	P 34
	Press CR.	P34
3	Refer to the record sheet and enter the required	P34	05
	port number.
	Example: Port 05, enter 0 5.
4	Press #. The present data will be displayed.	P34	05# 032
5	Refer to the record sheet and enter the required timing.	P34	05# 032 160
	Example: 160 seconds, enter 1 6 0.
6	To Exit Program/Store Data	P34	05# 032 160
	A) To store data, press CR.	P34	##
	B) Continue returning to step 3 until all Program 34	P
	data has been entered.
	C) To exit this program, press # # CR.

NOTE:

Program 35, use Type 2 procedure.

TABLE RM-AC

PROGRAM 36

FIXED CALL FORWARD

STEP	ACTION		DISPLAY/PRINTOUT
1	Enter the Program Mode	>MODE PROG
	At the >MODE prompt, enter P R O G CR.	P
2	Enter Program Number 36	P 36
	Press CR.	P36
3	Refer to the System Record Sheet and enter the	P36 00
	port number for the station that will have a Fixed
	Call Forward button. Example: Port 00, enter 0 0.
4	Press #. The present data will be displayed.	P36	00# NN
5	Refer to the System Record Sheet and enter	P36	00# NN 04
	the port to be forwarded to when the Fixed
	Call Forward button is pressed. Example: Port 04, enter 0 4.
6	To Exit Program/Store Data	P36	00# NN 04
	A) To store data, press CR.	P36	##
	B) Continue returning to step 3 until all Program 36	P
	data is entered.
	C) To exit this program, press # # CR.

-33-