Panasonic KX-TG6700AL Setting up the handset

Preparation

Setting up the handset

Battery installation/replacement

1Press the notch of the handset cover

firmly, and slide it in the direction of the

arrow.

LIf necessary, remove the old battery.

2Insert the battery (A), and press it

down until it snaps into position (B).

Then close the handset cover (C, D).

Important:

LUse only the rechargeable Panasonic

battery noted on page 5.

Battery charge

Place the handset on the base unit for 7

hours before initial use.

While charging, the charge indicator on the

handset lights in amber. When the battery

is fully charged, “Charge completed” is

displayed.

Note:

LIf you want to use the handset

immediately, charge the battery for at

least 15 minutes.

LTo ensure that the battery charges

properly, clean the charge contacts of

the handset and base unit with a soft,

dry cloth once a month. Clean more

often if the unit is subject to the exposure

of grease, dust, or high humidity.

A

B

C

D

TG6700AL.book Page 13 Tuesday, June 27, 2006 2:08 PM

Contents

Main Operating Instructions Page Introduction Accessory information Included accessories Additional/replacement accessories Expanding your phone system Handset (optional): KX-TGA670AL Important safety instructions SAVE THESE INSTRUCTIONS CAUTION: WARNING: For best performance Page Setting up the base unit Overview 1 2 Connecting the AC adaptor (230240 V AC, 50/60 Hz) Hook Page Page Setting up the handset Battery installation/replacement A 1 2 Page Controls Base unit Handset {V} Handset soft keys {^} {<}{>} Displays Base unit display items Handset display items Symbols used in these operating instructions 1 1 2 3 Setting the unit before use Date and time 1 2 3 4 Making calls Using the handset 3 1 2 1 2 3 4 Answering calls Using the handset 1 2 Using the base unit Useful features during a call 1 2 1 2 1 2 Using the other line during a call 1 2 3 1 Handset phonebook Adding items to the handset phonebook 1 2 3 4 5 Page Page Base Unit Speed Dialer Base unit speed dialler Adding phone numbers to the speed dialer 1 2 3 4 1 2 Using Caller ID service Call waiting and Caller ID compatible Caller ID Service Caller list Viewing the caller list and calling back 1 2 3 Storing your area code Page Programmable settings Programming by scrolling through the display menus 1 2 3 4 Page Programming using the direct commands 1 2 3 4 Page Page Answering system Memory capacity Turning the answering system on Screening calls Recording your greeting message 1 2 3 4 5 1 2 1 2 Prerecorded greeting message Listening to messages using the base unit 1 3 2 using the handset 1 2 1 2 1 2 3 Voice memo Recording a voice memo 3 1 2 Remote operation 1 2 1 2 Answering system settings Ring count 1 2 3 Callers recording time 1 2 3 Remote code 1 2 Recording mode 1 2 Message alert Intercom Making an intercom call 1 3 1 2 3 Transferring calls 1 3 4 1 Conference calls Conference call with 2 outside calls 1 2 3 3 Conference call with an outside call and an intercom call 1 3 1 2 3 Room monitor Setting room monitor 3 1 Monitoring a room Registering a handset 1 2 3 4 Wall mounting 3 4 Page Additional accessories Headset (optional) Belt clip (optional) Error messages Page Troubleshooting Page Page Page Instructions to customer ( ) WARNING: Specifications Index Index Index Page Page Page N52 PQQX15234ZA