{MENU} i{4}

Preparation

Setting the unit before use

Important:

LTo programme features by scrolling through the display menus, see page 33.

Date and time

Set the correct date and time. When you play back a message from the answering system (page 40), the unit announces the day and time it was recorded.

Handset

1

2 Enter the current day, month, and year by selecting 2 digits for each. Example: 15, August 2006

{1}{5} {0}{8} {0}{6}

3 Enter the current hour and minute (12- hour clock format) by selecting 2 digits for each.

Example: 9:30 {0}{9} {3}{0}

4 Press {AM/PM} to select “AM” or “PM”.

i{SAVE} i{OFF}

Note:

LIf you make a mistake when entering the date and time, press {<}, {>}, {^}, or {V} to move the cursor, then make the correction.

LIf a power failure occurs, Eflashes on the base unit to indicate the date and time must be set again.

Line selection

The line selection mode determines which line is selected when you press {C} on the handset or {SP-PHONE} on the base unit. The default setting is “Auto”.

Auto”: When making a call, line 1 is selected. If that line is unavailable, line 2 is selected. When answering a call, the ringing line is selected.

Line1”: Line 1 is selected.

Line2”: Line 2 is selected.

Handset line selection

Handset

1 {MENU} i{0}{5}{5}

2 Select the desired setting. i{SAVE}

i{OFF}

Note:

LYou can select a line manually regardless of the line selection mode by pressing {LINE1} or {LINE2}.

Base unit line selection

Handset

1 {MENU} i{0}{*}{5}

2 Select the desired setting. i{SAVE}

i{OFF}

Note:

LYou can select a line manually regardless of the line selection mode by pressing {LINE1} or {LINE2}.

19

Page 19
Image 19
Panasonic KX-TG6700AL operating instructions Setting the unit before use, Date and time, Line selection