Toshiba DK 16, DK8 manual Basic Connection, Device

INSTALLATION-PERIPHERALS SECTION 100-816-207 MARCH 1993

BASIC CONNECTION

DK8, QSMU* DK16, PIOU or

DK16, PIOUS

*QSMU, PROGRAM 10-3 LED 04-OFF

			DB25
	3-pair		Plug
	Modular		Modular
	Cord (7 ft. max)
			Jack	Printer
				or Call
				Accounting
SMDR		50 ft. max		Device
		24 AWG Wire
Modular
		Twisted Pair	Toshiba
Jack
		Modularized	PPTC1A-5M,

RS232, Modular to DB25 Adaptor

DATA FORMAT:

•ASCII

•8-bits

•No parity

•1-stop bit

•QSMU: 1200 bps

•PIOU/PIOUS 300 or

•1200 bps

BASIC WIRING (see: QSMU PIOU or PIOUS TTY and SMDR Wiring in Chapter 8 for more detail)

PIOU, SMDR Jack		PPTC1A-5M Adaptor		RS-232
Modular Pin No.		Modular Pin No.	DB25 Pin No.	Lead Name
1	To	6 To	3	RD
2	To	5 To	2	TD
3	To	4 To	6	DSR
4	To	3 To	20	DTR
5	To	2 To	8	CD
6	To	1 To	7	SG
			4 Jumper to 5	RTS to CTS

FIGURE 7-20

DK8 AND DK16 PIOU/PIOUS SMDR CABLE CONNECTIONS

7VOICE MAIL OPTIONS

7.00System Hardware Requirements

7.01The STRATA DK8 and DK16 may be config- ured to support Toshiba VP voice mail messaging system or a customer-supplier voice mail system.

7.02The DK8 must be equipped with a QSTU, and the DK16 must be equipped with a KSTU, PSTU, or PESU to support a voice mail system. The DK8 QSTU is equipped with two standard telephone circuits; the DK16 KSTU is equipped with four standard telephone circuits, the PSTU with eight, and the PESU with two. A K4RCU subassembly

must be installed in the DK16 Base Unit, and a QRCU must be installed in the DK8 KSU. The voice mail system can be connected to any standard telephone circuit at the MDF block.

7.10Toshiba VP Voice Messaging System

7.11The STRATA DK8 and DK16 is designed to support the full range of features offered by the Toshiba VP provides various call routing, message handling, and information management features, including:

• Automated Attendant

• Call Forward to Voice Mailbox

• Message Waiting Indication

7-28