Toshiba DK8, DK 16 manual Enter Modified Digits Table Number, Enter Code, P55 10 05, P55 ##

	REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
		SECTION 100-816-600
		MARCH 1993
	TABLE RM-BH
	PROGRAM 55-0
	LCR MODIFIED DIGITS-DELETE
STEP	ACTION	DISPLAY/PRINTOUT
1	Enter Program Mode	>MODE PROG
	At the >MODE prompt, enter P R O G CR.	P
2	Enter Program Number 55	P 55
	Press CR.	P55
3	Enter Modified Digits Table Number	P55 1
	Refer to the System Record Sheet and enter the modified
	digits table number (1 ~ 6).
	Example: Enter modified digits table number 1, enter 1.
4	Enter Code 0	P55 10 05 10
	The system will display any previously entered number of
	digits to be deleted (01 ~ 10).
	Refer to the System Record Sheet and change number if required.
	Example: Change to 10, enter: 1 0.
5	To Exit Program/Store Data	P55 10 05 10
	A) To store data, press CR.	P55 ##
	B) Continue returning to step 3 until all data has been entered	P
	for this program.
	C) To exit this program, press # # CR.

-57-