Toshiba DK 16 manual DK8 and DK16 Smdr Printout Examples

INSTALLATION-PERIPHERALS

SECTION 100-816-207

MARCH 1993

07/06/90 <DD/MM/YY, EVERY FIFTY CALL RECORDS AND AT MIDNIGHT>
01	15 08:14	00:00;22	123456987	456789

01MODM 08:15 00:00;18 00;00 <DISA CALL TO IMDU>

0310 08:16 00:00;28 00;08 12

03DISA 08:16 00:00;15 <OUTGOING DISA ACCESS BY INCOMING DISA 01>

01DISA 08:17 00:00;25 <INCOMING DISA AND ACCESS CO 03 OUTGOING>

03	MSS 08:18 00:00;12				00;06 15		<05 ANSWERS DISA CALL 12 SECONDS AFTER DK DIAL TONE>
03	6	15	08:19	00:00;22		12	First Digit (varies)	Last (always this column)
		12	08:19	00:00;16
03*
04		10	08:20	00:00;34			12345678912345678965412365		First Digit (varies)		Last
02		10	08:22 00:00;22					7145833700
01		15	08:23	00:00;40				7145833700	123456789456321
3	3		3	3	3	3		3	3
Column(FC: 1-2)	(FC: 4-7)		(FC: 9-13)	(FC: 15-22)	(FC: 24-28)	(FC: 30-33)			(FC: 62-76)
								(FC: 35-60)		(4~15 digits)
										Account Code
Field								Outgoing Telephone Number (1~26 digits)
							Station to which the CO Line was transferred (1~4 digits)
						CO Line Incoming Ring Duration Before Answer (MM:SS)

Call Duration (HH:MM:SS, see Note 1)

Time of Day (HH:MM; hour and minute the call was released)

Station Number (1~4 digits; see Note 2)

CO Line Number (01~36)

NOTES:

1.Call Duration (incoming, outgoing, or transfer) can be 1.0 or 10 seconds (minimum) to generate a call record printout (see Program 60-2).

2.“MSS”: designates a Direct Inward System Access (DISA) CO call to a station that is not answered; or, answered after 1.0 or 10 seconds (depending on Program 60-2). DISA calls always register 05 ~ 06 seconds ring before answer duration time.

“MODM”: designates a call to the IMDU, Remote Maintenance Modem.

“DISA”: designates a DISA call thru the system via CO to CO connection.

*3. Field column information is provided for SMDR output formatting purposes.

4.The call record data is ASCII-formatted, 8 bits; no parity, 1-stop bit.

5.Special dial printout:

Tone = "T"

Long pause = "L"

Flash = "F"

Pause = "P"

6.The "*" indicates that the call was disconnected by the Central Office Calling Party Control (CPC) or Automatic Release (AR) signal. CO lines must have Programs 15-0 and 15-3 enabled to be dropped by the CPC signal.

FIGURE 7-19

DK8 AND DK16 SMDR PRINTOUT EXAMPLES

7-26