Toshiba DK8, DK 16 manual Table RM-AZ, LCR Special Codes

	REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
			SECTION 100-816-600
			MARCH 1993
	TABLE RM-AY
	PROGRAM 50-2
	LCR HOME AREA CODE
STEP	ACTION		DISPLAY/PRINTOUT
1	Enter Program Mode	>MODE PROG
	At the >MODE prompt, enter P R O G CR.	P
2	Enter Program Number 50	P 50
	Press CR.	P50
3	Enter the number 2. The system will display the last area code	P50	2 NNN
	programmed. Refer to the System Record Sheet and change
	if required.
4	To Exit Program/Store Data	P50	2 NNN
	A) To store data, press CR.	P50	##
	B) To exit this program, press # # CR.	P

TABLE RM-AZ

PROGRAM 50-31 ~ 35

LCR SPECIAL CODES

STEP	ACTION		DISPLAY/PRINTOUT
1	Enter Program Mode	>MODE PROG
	At the >MODE prompt, enter P R O G CR.	P
2	Enter Program Number 50	P 50
	Press CR.	P50
3	Refer to the System Record Sheet and enter 31 ~ 35 as required.	P50	31 NNNN
	Example: 31, enter 3 1.
	System will display previously programmed number. Refer to the
	System Record Sheet and change if required.
4	To Exit Program/Store Data	P50	31 NNNN
	A) To store data, press CR.	P50	##
	B) Continue returning to step 3 until all data for this program has	P
	been entered.
	C) To exit this program, press # # CR.

-51-