Toshiba DK 16, DK8 manual Table RM-AW Program Station Toll Restriction Classification

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES

SECTION 100-816-600

MARCH 1993

TABLE RM-AW

PROGRAM 48

STATION TOLL RESTRICTION CLASSIFICATION

STEP	ACTION		DISPLAY/PRINTOUT
1	Enter the Program Mode	>MODE PROG
	At the >MODE prompt, enter P R O G CR.	P
2	Enter Program Number 48	P 48
	Press CR.	P48
3	Refer to the System Record Sheet and enter the required port	P48	00
	number.
	Example: Port 00, enter 0 0.
4	Press # key. The system will display the present data as a	P48	00# 13
	two-digit code: The first digit designates digit free or digit restrict.
	The second digit is the station restriction code. Refer to the
	System Record Sheet and change if required.
5	To Exit Program/Store Data	P48	00# 13
	A) To store data, press CR.	P48	##
	B) Continue returning to step 3 until all data is recorded for this	P
	program.
	C) To exit this program, press # # CR.

TABLE RM-AX

PROGRAM 50-1

LCR PARAMETERS

STEP	ACTION			DISPLAY/PRINTOUT
1	Enter Program Mode	>MODE		PROG
	At the >MODE prompt, enter P R O G CR.	P
2	Enter Program Number 50.	P 50
	Press CR.	P50
3	Enter 1. Refer to the System Record Sheet and enter the required	P50	1	01	N
	button/LED number.
	Example: Button 01, enter 0 1.
4	Refer to the System Record Sheet and change button/LED status,	P50	1	01	N
	if required.			02	N
	Press SPACE to move to next button/LED.
5	To Exit Program/Store Data	P50	1	01	N
	A) To store data, press CR.			02	N
	B) To exit this program, press # # CR.	P50	##
		P

-50-