Toshiba DK 16, DK8 manual Table RM-AO Program Toll Restriction Dial Plan, Enter the number

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES

SECTION 100-816-600

MARCH 1993

TABLE RM-AN

PROGRAM 44 (A OR B)

TOLL RESTRICTION TRAVELING CLASS OVERRIDE CODE ENTRY

STEP		ACTION		DISPLAY/PRINTOUT
1	Enter Program Mode		>MODE PROG
	At the >MODE prompt, enter P R O G CR.		P
2	Enter Program Number 44 (Do not enter A or B)		P 44
	Press CR.		P44
3	Refer to the System Record Sheet and enter the required Toll		P44	1 NNNN
	Restriction Class number (1 ~ 4).
	Example: Class 1; Enter: 1.
	The system will display the present override code assigned to
	that class number.
4	Refer to the System Record Sheet and enter the required override		P44	1 NNNN 3456
	code number.
	Example: 3456; Enter 3 4 5 6.
5	To Exit Program/Store Data		P44	1 NNNN 3456
	A)	To store data, press CR.	P44	##
	B)	Continue returning to step 3 until all Program 44 data	P
		is entered.
	C)	To exit this program, press # # CR.

TABLE RM-AO

PROGRAM 45-1

TOLL RESTRICTION DIAL PLAN

STEP	ACTION			DISPLAY/PRINTOUT
1	Enter the Program Mode	>MODE PROG
	At the >MODE prompt, enter P R O G CR.	P
2	Enter Program Number 45	P 45
	Press CR.	P45
3	Enter the number 1.	P45	1	1
	The system will display the present dial plan code number (1 ~ 5).
4	Refer to the record sheet and enter the required code number.	P45	1	1	2
	Example: Code 2, enter 2.
5	To Exit Program/Store Data	P45	1	1	2
	A) To store data, press CR.	P45	##
	B) To exit this program, press # # CR.	P

-44-