Toshiba DK8, DK 16 manual Removing the Telephone Base, Handset Hanger, Wall Mounting Base Rotation

HANDSET	PLASTIC
	TAB
HANGER

FIGURE 6-1

REMOVING THE TELEPHONE BASE

HANDSET

HANGER

FIGURE 6-2

HANDSET HANGER

INSTALLATION-STATION APPARATUS

SECTION 100-816-206

MARCH 1993

2.42Mount digital and electronic telephones in accordance with the following steps:

NOTES:

1.Digital telephones equipped with Inte- grated Data Interface Units (PDIU-DIs or PDIU-DI2s) cannot be wall mounted.

2.Electronic and older digital telephones equipped with an HHEU1 can be wall mounted. 2000-series Digital Telephones with headsets can only be wall mounted with an HHEU2.

1)Loosen the captive screws, and remove the telephone base (Figure 6-1).

2)Using a suitable cutter, remove the handset hanger from the base (Figure 6-1). Insert the handset hanger in the slot provided on the front of the telephone (Figure 6-2). The hanger fits in the notch on the handset cradle.

3)Rotate the telephone base 180 degrees and secure it to the telephone with its four captive screws (Figure 6-3).

FIGURE 6-3

WALL MOUNTING BASE ROTATION

6-3