Toshiba DK8, DK 16 manual Table RM-BF Program LCR Schedule Assignment, Define Schedule Number

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES

SECTION 100-816-600

MARCH 1993

TABLE RM-BF

PROGRAM 53

LCR SCHEDULE ASSIGNMENT

STEP	ACTION		DISPLAY/PRINTOUT
1	Enter Program Mode	>MODE PROG
	At the >MODE prompt, enter P R O G CR.	P
2	Enter Program Number 53	P 53
	Press CR.	P53
3	Define Route Plan Number	P53	1
	Refer to the System Record Sheet and enter the route
	plan number (1 ~ 8).
	Example: Route Plan 1, enter 1.
4	Define Schedule Number	P53	11
	Refer to the System Record Sheet and enter the required
	schedule number (1 ~ 3).
	Example: Schedule 1, enter 1.
5	Enter Code Number 0	P53	110 0000 0800
	The system will display the previously selected time for	P53
	the route plan number (step 3) and the schedule number (step 4).
	Refer to the System Record Sheet and change the time if required.
	Example: Change to 0800. Enter 0 8 0 0.
	Press CR and repeat steps 3, 4, and 5 for all plans/schedules.
	NOTE: Enter time using 24-hour format: H H M M.
6	Priority Class Assignment	P53	111 NNNN 12
	Enter the route plan number as defined in step 3.	P53
	Enter the schedule number as defined in step 4.
	Refer to the System Record Sheet and enter the required
	station group number (1 ~ 4).
	Example: Group 1, enter 1.
	The system will display the previously entered route definition
	numbers (reference Program 54 ).
	Refer to the System Record Sheet and enter required
	route definition numbers (1 ~ 4) and press CR.
	Example: Enter 1 and 2 CR.
	Continue to repeat steps 3, 4, and 6 until all plans/schedules
	are entered.
7	To Exit Program/Store Data	P53	##
	A) Data was stored when pressing CR in step 6.	P
	B) Continue returning to step 3 until all data is entered
	for this program.
	C) To exit this program.
	Press # # CR.

-55-