Toshiba DK 16 Table RM-M Program Logical Port Display, Table RM-N Program Physical Port Display

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES

SECTION 100-816-600

MARCH 1993

TABLE RM-M

PROGRAM 01

LOGICAL PORT DISPLAY

STEP	ACTION			DISPLAY/PRINTOUT
1	Enter the Program Mode	>MODE PROG
	At the >MODE prompt, enter P R O G CR.	P
2	Enter Program Number 01	P 01
	Press CR.	P01
3	Enter the Physical Port Number	P01
	Enter the desired physical port number.	P01	01
	Example: Port number 01, enter 0 1.					Logical Port Displays
					Physical Port
4	Verify Physical Port's Associated Logical Port	P01	01			(	= Logical Port)
5	To Display More Ports/Exit Program	P01	01			##
	A) To display more logical ports, press CR and go to Step 3.	P01	##
	B) To exit this program, enter # # CR (twice).	P (after exit)

TABLE RM-N

PROGRAM 02

PHYSICAL PORT DISPLAY

STEP	ACTION			DISPLAY/PRINTOUT
1	Enter the Program Mode	>MODE PROG
	At the >MODE prompt, enter P R O G CR.	P
2	Enter Program Number 02	P 02
	Press CR.	P02
3	Enter the Logical Port Number	P02
	Enter the desired logical port number.	P02	02
	Example: Port number 02, enter 0 2.					Physical Port Displays
					Logical Port
4	Verify Logical Ports Associated Physical Port	P02	02			(	= Physical Port)
5	To Display More Ports/Exit Program	P02	02			##
	A) To display more physical ports, press CR and go to Step 3.	P02	##
	B) To exit this program, enter # # CR (twice).	P (after exit)

-24-