Toshiba DK8, DK 16 manual Table RM-AM Program CO Line Identification, P93, Enter Action Code

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES

SECTION 100-816-600

MARCH 1993

TABLE RM-AM

PROGRAM 93

CO LINE IDENTIFICATION

STEP			ACTION		DISPLAY/PRINTOUT
1	Enter Program Mode			>MODE PROG
	At the >MODE prompt, enter P R O G CR.			P
2	Enter Program Number 93			P 93
	Press CR.			P93
3	Enter Action Code 1			P93	1 02		(up to 16)
	Refer to the System Record Sheet and enter the appropriate						Current I.D.
	CO line number.
	Example: CO line 2, enter 0 2.
	The system will display previously entered identification
	characters (up to 16 characters).
4	Refer to the System Record Sheet and change identification			P93	1 02		(up to 16)
	if required:	. . . . . . . . . .	(16 characters maximum).			OVERSEAS
	Example: OVERSEAS.
5	To Exit Program/Store Data			P93	1 02		(up to 16)
	A) To store data, press CR.					OVERSEAS
	B) Continue returning to step 3 until all data has been entered			P93	##
	for this program.			P
	C) To exit this program, press # # CR.

NOTE:

Use SPACE to clear characters.

-43-