Toshiba DK 16 Table RM-BG Program LCR Route Definition, Enter Route Plan Number, P54 12 11

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES

SECTION 100-816-600

MARCH 1993

TABLE RM-BG

PROGRAM 54

LCR ROUTE DEFINITION

STEP	ACTION			DISPLAY/PRINTOUT
1	Enter Program Mode	>MODE PROG
	At the >MODE prompt, enter P R O G CR.	P
2	Enter Program Number 54	P 54
	Press CR.	P54
3	Enter Route Plan Number	P54	1
	Refer to the System Record Sheet and enter the required
	route plan number (1 ~ 8).
	Example: Route plan 1, enter 1.
4	Enter Route Definition Number	P54	12 11 32
	Refer to the System Record Sheet and enter the required
	route definition number (1 ~ 4).						Modified Digit Table No.
	Example: Enter route definition number 2, enter 2.						CO Line Group No.
	The system will display the previously entered CO line					Route Definition No.
	group number (1 ~ 8) and the modified digits table number (1 ~ 6).				Plan No.
	Refer to the System Record Sheet and enter the CO line
	group and modified digit numbers as required, then press CR.
	Example: Change the CO line group number to 3 and the
	modified digits table to 2. Enter: 3 2 CR.
5	To Exit Program/Store Data	P54	12 11 32
	A) To store data, press CR.	P54	##
	B) Continue returning to step 3 until all data has been entered	P
	for this program.
	C) To exit this program, press # # CR.

-56-